The advantages of using the station's stop valve

1. The fluid resistance is low, and its resistance coefficient is equal to that of a pipe section of the same length.

2. The structure is simple, the volume is small, and the weight is light.

3. It is tight and reliable. The sealing surface materials of current gate valves are widely used in plastics, and the sealing performance is good. It has also been widely used in vacuum systems.

4. The operation is convenient, the opening and closing are flexible. From fully open to fully closed, it only needs to rotate 90 degrees, which is convenient for remote control.

5. Repair is convenient. The gate valve structure is simple, and the sealing ring is usually movable. It is relatively convenient to disassemble and replace.

6. When fully open or fully closed, the sealing surfaces of the ball and the valve seat are isolated from the medium. During the medium passage, the valve sealing surfaces will not be corroded.

7. The application range is wide. The diameter ranges from a few millimeters to several meters, from high vacuum to high pressure. It can be used in all these situations.

Power station gate valves are suitable for various systems of thermal power plants and are used to cut off or connect the medium in the pipeline.

Applicable media: water, steam, etc. non-corrosive media. Compared with other valve products, the characteristics of power station valves are high temperature and high pressure, self-sealing design, and the higher the pressure, the more reliable the sealing. Due to the performance and technical characteristics and the special working conditions, the product also has characteristics that other products cannot replace.